Comfort Sensor
The Adeunis COMFORT is a LoRaWAN IoT sensor designed for monitoring Indoor Air Quality in smart buildings. It measures room temperature and humidity, enabling optimization of ambient comfort and energy savings. The sensor is a 4-in-1 product featuring temperature, humidity, an alarm button, and a dry contact input, with over 15 years of battery autonomy depending on configuration.
Features
- Temperature Measurement: Range -20°C to +50°C with ±0.3°C accuracy (5°C to 50°C range)
- Humidity Measurement: Range 0% to 100% RH with ±2% RH accuracy (20% to 80% RH range)
- Resolution: 0.1°C and 0.1% RH
- Alarm Button: Integrated button for event detection and alert triggering
- Dry Contact Input: Digital input to detect state changes
- Data Transmission: Periodic and/or event-triggered modes
- Threshold Alerts: Configurable high and low threshold monitoring with alarm repetition
- Configuration: Local via USB-C or NFC, remote via LoRaWAN downlinks
- Battery Life: Over 15 years (SF7, 1 transmission per hour)
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 111 x 61 x 40 mm |
| Weight | 102g |
| Protection Rating | IP20 (Indoor use) |
| Operating Temperature | -20°C to +60°C |
| Frequency Band | EU863-870 MHz |
| LoRaWAN Class | Class A (OTAA) |
| Transmit Power | +14 dBm |
| Maximum Range | 15 km |
Use Cases
- Smart building climate monitoring
- Office and commercial building HVAC optimization
- Social and collective housing energy management
- School and university indoor environment monitoring
- Hospital and healthcare facility comfort control
- Hotel room climate management
- Industrial facility environmental monitoring
- Mold prevention through humidity tracking
Thinger.io Integration
Requirements
A LoRaWAN server is required to communicate the Comfort Sensor with Thinger.io. Supported options include:
The corresponding plugin for the selected LoRaWAN server must be installed in your Thinger.io instance.
Get Started
Installation
Look for the plugin in the Thinger.io Plugin Store and install it in your Thinger.io instance. Once the plugin is installed, a new Product will be created for this device.
Configuration
The Product is already preconfigured. Verify that the auto provision prefix matches the one selected in your LoRaWAN server plugin in Thinger.io, or modify it as needed.
Usage
Start sending uplinks for automatic provisioning of devices and buckets.
This product also provides a predefined dashboard and downlink capabilities.