Milesight AT101

The Milesight AT101 is an exceptional outdoor LoRaWAN GPS tracker that combines GNSS and Wi-Fi AP MAC Address Scanning technologies to deliver highly accurate positioning data. It is equipped with tilt and temperature sensors, enabling extensive data collection and versatile application in various scenarios.

Features

Dual Positioning Technology: GNSS positioning with 5.0m accuracy (CEP) and Wi-Fi AP MAC address scanning for enhanced indoor location tracking
Multiple Tracking Modes: Motion tracking, periodic tracking, and timing tracking modes
Environmental Sensors: Built-in tilt detection and temperature monitoring (-40°C to 125°C range)
Rugged Design: IP67 water resistance and IK09 impact protection for demanding outdoor environments
Long Battery Life: Up to 15+ years with twice daily location updates (4× 2700 mAh ER14505 replaceable batteries)
Advanced Features: Geofencing, tilt threshold alarm, tamper alarm, data storage (1000 entries), and retransmission capability
Easy Configuration: NFC and Bluetooth 5.3 support for quick setup
LoRaWAN Connectivity: Supports OTAA/ABP activation, Class A, with global frequency bands (CN470/IN865/RU864/EU868/US915/AU915/KR920/AS923)

Use Cases

Outdoor asset tracking and management
Fleet and vehicle monitoring
Container and cargo tracking
Equipment and machinery location monitoring
Theft prevention and recovery
Cold chain monitoring with temperature sensing
Geofence-based security applications

Technical Specifications

LoRaWAN

Protocol: LoRaWAN®
Frequency Bands: CN470/IN865/RU864/EU868/US915/AU915/KR920/AS923-1&2&3&4
Tx Power: 16 dBm (868 MHz) / 20 dBm (915 MHz) / 19 dBm (470 MHz)
Sensitivity: -137 dBm @300bps
Activation: OTAA/ABP
Class: A
Antenna: Internal

GNSS Positioning

Position Accuracy: 5.0m CEP (Direct Line of Sight)
Resolution: Longitude/Latitude 0.000001°
Time to First Fix: Cold start 37s / Hot start 1s (average)
Sensitivity: Tracking -167 dBm / Reacquisition -160 dBm / Cold start -148 dBm / Hot start -159 dBm

Wi-Fi Positioning

Technology: Indoor asset location using Wi-Fi access point scanning (device does not connect to Wi-Fi)
Parameters: BSSID, RSSI
Standard: 802.11b/g/n 2.4GHz

Sensors

Tilt Detection: Normal/Tilt status
Temperature Range: -40°C to 125°C
Temperature Resolution: 0.1°C

Physical Characteristics

Dimensions: 110 × 70 × 30 mm (4.33 × 2.76 × 1.18 in)
Weight: 202g (batteries included)
Material: PC, Black
Ingress Protection: IP67
Impact Protection: IK09
Operating Temperature: -30°C to +70°C
Relative Humidity: 0 ~ 95% (Non-condensing)

Power

Battery: 4 × 2700 mAh ER14505 Li-SOCl2 replaceable batteries
Battery Life (at 25°C):
Twice daily location updates: 15+ years
Tenth daily location updates: 8+ years
Hourly location updates: 4+ years

Interface & Configuration

Buttons: 1 × Tamper button, Power button (internal)
Configuration Methods: NFC, Bluetooth® 5.3, Downlink
Installation: Wall mounting

Thinger.io Integration

The Milesight AT101 integrates with Thinger.io through a LoRaWAN network server, enabling real-time tracking, sensor data visualization, and remote device management.

Requirements

A LoRaWAN server is required to communicate the Milesight AT101 into Thinger.io, some options are:

Alongside, the corresponding plugin for the selected LoRaWAN server needs to be installed in your Thinger.io instance.

Get Started

Installation

Look for the plugin in the Thinger.io Plugin Store and install it in your Thinger.io instance. Once the plugin is installed a new Product will be created for this device.

Configuration

The Product is already preconfigured, check that the auto provision prefix matches the one selected in your LoRaWAN server plugin in Thinger.io, or change it to your desire.

Usage

Start sending uplinks for autoprovisioning devices and buckets. This product also provides a predefined dashboard and downlinks.

Additional Resources

Milesight resources can be found at: